Covers: Do you use them, does anyone make them, etc....

[pjr300]

Greetings All:

This forum has been very helpful in helping me understand that panel performance is enhanced by keeping them dust free and minimizing humidity. So my question is: is it common practice to use some sort of dustcover on the speakers when not in use? If so, is there a recommended design for them? Or a source for purchasing them?

 

[VideoVic]

Greetings All:

This forum has been very helpful in helping me understand that panel performance is enhanced by keeping them dust free and minimizing humidity. So my question is: is it common practice to use some sort of dustcover on the speakers when not in use? If so, is there a recommended design for them? Or a source for purchasing them?

Hello PJR. if you bought your ESL new, there probably were black cloth covers in the box they were shipped with and you should use those. I use the ones that came with my ESL - X and since I use my speakers every night for watching TV I put them on before I go to bed. If you did not buy the speakers new, you can probably order a pair direct from Martin Logan and yes, they help extend the cleanliness of the speakers so vacuuming needs to be done less frequently.
Best regards.
VideoVic

 

[Heyfey]

I've gotten very nice covers for my Odysseys and Theos from Digital Deck:

https://www.digitaldeckcovers.com/

 

[gvera]

I also use covers.
There are several covers in the market but most of them also cover the woofer cabinet which I think spoils the looks of the speaker.
I bought the following ones that only covers the panel.

https://www.ebay.com/itm/204467493965?_ul=UY

The photos are actually of my own speakers, the seller didn't have any photos of the installed covers so I sent them mine.

Regards,
Gustavo

 

[Kermie]

Thanks for this link. I have 3 covers from this company for my Reel to Reels and they are very well made. This will be another purchase from them.

 

[pjr300]

Thanks all! I did not acquire my speakers new, and therefore i did not receive some of the goodies, like manuals, boxes, and now i learn dustcovers as well. Sounds like i have a new task!

 

[MHzTweaker]

I had https://www.digitaldeckcovers.com/ make me a set based on my measurements to cover just the panels. I had them made a little thick because I was unsure due to the stator being thinner at the top. There's a flap in back not sewn from 38 inches down to cover the space between the stator and bass box.

I just replaced my panels a couple weeks ago so I'm going overboard to keep dust off them including a new HEPA air filter seen in the photo that runs 24 hours a day when I'm not listening to music. I also bought manual remote power switches to manually shut the power off to them.

 

[DanR]

I had https://www.digitaldeckcovers.com/ make me a set based on my measurements to cover just the panels. I had them made a little thick because I was unsure due to the stator being thinner at the top. There's a flap in back not sewn from 38 inches down to cover the space between the stator and bass box.

I just replaced my panels a couple weeks ago so I'm going overboard to keep dust off them including a new HEPA air filter seen in the photo that runs 24 hours a day when I'm not listening to music. I also bought manual remote power switches to manually shut the power off to them.


View attachment 25783


View attachment 25784



View attachment 25785

I’m right there with you on the dust thing tweaker I have a local guy here that makes boat covers and refurbs boat seats he made these up for me from my measurements. I installed new panels on my Odysseys and have had them covered whenever not in use since. I also use digital deck covers to cover my amps when not in use they make excellent covers.

 

[MHzTweaker]

I am also recovering the frames for the bass bins. THIS has been an eye opening experience for sure. I have yet to fully discover how Martin Logan got those frames covered so perfectly but I am getting there. The first frame is almost done and it has been my BETA test.

There are some things I can say for sure.
Standard speaker grill cloth will not work! I bought 4 yards of the best Mellotone from Parts Express. Wasted money. It does not stretch. Prodigy frames are just odd and crazy deep at the bottom half of the frames. Matin Logan original cloth may be some type of Lycra but it stretches in one direction a lot. Not so much on the other axis. I found some material at JoAnn Fabric (going out of business ) and bought 3 yards of it for roughly $50. It stretches in both X and Y axis. One yard should do 2 frames. I bought an extra yard in case of mistakes.

Martin Logan used glue to put the cloths on then dressed up the inside edges with a fabric ribbon, maybe to keep the edges from fraying. I am doing something similar. There is a popular speaker glue that is rather expensive for not much glue. I have found that Yeardera fabric glue is essentially the same thing and you get twice as much glue for less money. It smells exactly the same. Basically, contact cement. I used a black Outus 32mm (3/4") wire harness cloth electrical tape from Amazon that works perfectly when glued a day after the grill cloth has been glued for extra edge protection.