HELP: Summit X--problem with start up POWER??

[tabascocat1994]

I rearranged my system (which had been functioning propoerly) in my room, re-set up the system, and ran into a problem similar to what occurred when I originally set the system up. The first time (original set up) I did a trial and error method until it was fixed but I do not know exactly what fixed it. It appeared to be fixed when I split the the electroics onto two sepreate outlets. That did not work this time but helped (improved sound somewhat).

Currently, the speakers seem to be under powered, although in a system that does not have amplified power issues. It has a signal but plays "quietly" (25% typical) and with poor quality. It seems like a problem with the power supply or at the outlet. I believe it is a set up issue since everything was just working fine. Any one have a similar issues?

Any help would be appreciated.:bowdown::bowdown::bowdown:

 

[tabascocat1994]

Not the MLs

I tried a pair of Paradigm S4s with the same sytem/setup, and they did the same thing that the MLs were doing. Any ideas?

 

[as350_b3]

Does the ML logo light up when you plug the speakers into the wall outlet? It almost sounds like you have an intermittent power supply problem.

 

[tabascocat1994]

MLs are OK

I switched speakers and sources so far, and I narrowed it to the preamp, amps or other power issue.

My power went off last night due to a storm, but I use a Belkin surge protector/conditioner which seems okay. Maybe this is a result of the power failure?

 

[tabascocat1994]

Problem Solved: BLOWN AMP FUSES

Are all fuses the same. The are marked BUSSAGC 10A & 250V.