Advice on conneting to power source

[fvbruin]

I have the Source (R/L), Matinee, and Dynamo and my question is it okay to just plug in the power to a regular AC plug or can i use a surge protector? I also have a Rotel RLC-900 AC line filter and power sequencer that has the following back panel,

with the left 6 outlets available for Digital Equipment and Accessories. I already have the two outlets for power amp connected to my Integra Receiver DTR 7.8 and my B&K Reference 200.2 stereo amp. Could i use the other 6 outlets for the speakers and Dynamo??

 

[Jeff Zaret]

fvbruin,

I would say yes. I would also listen for any changes in the sound of your system. I really do not think you will have a problem because none of the components are a real big current draw. It is always a good idea to protect your investment. Typically but not always, they say do not plug your amp in to one of these because it will change the sound a bit of your amp but ymmv.

Depending on how good the power is coming in to you place in the O.C.,which typically is normal, you will be fine

Good Luck

Jeff