DTB300
Well-known member
While out surfing the net, I ran across a review from "6 Moons" and as part of this article the reviewer stated:
"A quick word on A/B/As. If done too rapidly and for too short a duration per interval, you may hear no difference at all. That's because the list of differentiators is far longer than can be ascertained in 15-second sound bytes. There's frequency response, harmonic distortion, noise floor, timing, dynamics, resolution and spatial soundstaging cues. If differences were restricted to just one of these areas, it'll take you a while to sort through your list and cross off individual attributes until you hit upon the one (or two or three) that actually differ and know where to look for them. "
It was interesting to read. While trying to determine all the points he listed does take time (frequency resp, noise floor, etc.), I have always thought that the longer you wait between tests, the more your brain "forgets" what it just heard. For instance, if you are testing out Power Amps, and you have to shut it down, re-cable, and power up, there tends to be a great amount of time between these switch-outs. If there are small changes between the amps, they wil then be harder to distinguish. Now if there are GREAT changes, these "should" be heard. Maybe? Possibly?
What are some of your thoughts on this type of testing?
Dan
"A quick word on A/B/As. If done too rapidly and for too short a duration per interval, you may hear no difference at all. That's because the list of differentiators is far longer than can be ascertained in 15-second sound bytes. There's frequency response, harmonic distortion, noise floor, timing, dynamics, resolution and spatial soundstaging cues. If differences were restricted to just one of these areas, it'll take you a while to sort through your list and cross off individual attributes until you hit upon the one (or two or three) that actually differ and know where to look for them. "
It was interesting to read. While trying to determine all the points he listed does take time (frequency resp, noise floor, etc.), I have always thought that the longer you wait between tests, the more your brain "forgets" what it just heard. For instance, if you are testing out Power Amps, and you have to shut it down, re-cable, and power up, there tends to be a great amount of time between these switch-outs. If there are small changes between the amps, they wil then be harder to distinguish. Now if there are GREAT changes, these "should" be heard. Maybe? Possibly?
What are some of your thoughts on this type of testing?
Dan