Search results

Your completely unfounded accusations about his purpose in being added to the staff completely ****es me off. He has been hired to help improve processes in terms of parts procurement and efficiency in getting ideas put to together, something i think is a great need as we need help in speeding...

The old Script was $2200 and was needing to go to $2500 in 2007, but was killed based on poor sales volume. I am not sure that should be an example. Now, jump ahead some years, build a better one with metal extrusions, not plastic trim, better finish, updated sound quality and you can see we...

ok, enough more questions on the EFX so I can get back in. As to Horizontal, remember that lateral dispersion will now be controlled by the lenght of the panel so it will be a pretty narrow sweet spot. A Motif would be a better choice. As to cost, there is a lot of specialized construction...

The oven made it up there. Needless to say it is a different part of the factory, separate from finish and assemly areas. The factory is about 260,000 square ft, with several sections so the oven is over on the side where wood is cut and other messy jobs. As to the articles, i don't really...

EM(Electromotion) EFX will be the name and we are looking to get them into shops by end of the month. They will be shown, playing, at CEDIA at the beginning of September. I like them since it shows how far we have come as a manufacturer. From a distance, they look very much like a script, but...

on the matching of serial numbers. We do QC on individual parts, sub assemblies, final product against a reference. As a result, unit to unit variance is extremely small. Since the EM are not a wood grained product, there is little reason to have to have them as sequenced pairs. The biggest...

I will take some burden off of Roberto, who seems to live on this site. Canada is the final construction point. Panel is made there, box is outsourced to a long time vendor in China, two products get assembled, QCed in Canada. We will not release the actual panel construction details to an...

$3K ish a pair. retail not quite set yet. Details will hit the site once it is ready to ship so no specifics can be sent at this moment. Your patience will be rewarded shortly, as soon as can be just not sooner. Justin is very busy on website work/improvements as well as new product updates...

ok guys, we did not reinvent physics. what everyone is forgetting is that there are two chambers on a Summit as both woofers have their own air volumes. The back panel is the active electronics and the passive xover and transformer are in the other chamber. I had a cutaway once showing that...

Ok, if i must. I was at THE SHOW in LA so was the leaky valve you heard. Yes, the EM EFX will be out next month. It is essenitailly a modern Script. For a visual on its look, think Purity panel with the lenght being the lenght of the extrusions. It does not have the Summit/Spire panel...

I would check with ML service as i am not sure. I believe it is a separate board so is not involved with the sensor.

it requires a new board to install, not hard and comes with instructions. Understand, it is a guess as to what is wrong, but in all cases, it will be strange to have to ship the entire speaker back. Please conact ML service for best advice.

To MIke: please contact ML service but it will be shocking to have to pack them up and ship back. We design our products in a reasonably modular way so customers can take care of a reasonable repair. My real reason for answering is to Jungle Jack. if you are having very noticable difference...

Remember, as an employee of ML I have the bias, but to all of those who have gone to both CES and CEDIA, I did do comparisons between both speakers and for the very reason you need some insight on. On paper, these look virtually identical but in comparsions, everyone heard the improvements that...

rubber on a doped paper cone. it and the metal version used in vignettes and frescos have proven to be a very robust driver. hope that helps.

the filter is a circuit board that will plug into 4 connections on the controller board, underneath the top. it retails for $180 and a dealer may order it for you. Once the board is installed, it replaces the 30 hz X over point. In my multiple set ups with the speaker, I have always achieved...

the tweeter is slightly longer when used in the normal verical orientation so dispersion is slightly wider horizontally, a bit less vertically. Placed on its side, it migh present a slight loss of detail when off to the side. Very subtle so if you are having good results, then use away as one...

Actually if the Motion 4 is vertical, dispersion will work very well. On its side, not quite so well. As to Audyssey, I often overwrite it as I (and others) don't necessarily agree with with it reads. Go ahead and lower the frequency of the Motion 6 to 80 to 100 hz without issue.

Actually if one removed the rubber plugs at the end of the post, they will except bananas. Given the price point and the typical user as well often mounted on the wall, the spring loaded recessed posts have been well recieved by the typical user.

We are trying to distribute enough across all of our channels. If you have a local dealer that your prefer, ask them to see if they are on order with us. We do try to be fair, but with the obvious demand they will be a first come/first to get some, but not all type of delivery. It will be...