Search results

Of the 4 DSP systems I've tried, the best has been Anthem with Martin Logan, but this is because the system adjusts only the amplifier built into the bass enclosure - it therefore has absolutely nil effect on the panel. 3 other systems I've tried (RoomPerfect, Dirac Live and MARS) have all...

Certainly 13As must not be placed too far forward from the back wall - or other speakers that project as much energy backwards as forwards for that matter. In my room 13As were a disaster and I sold them after a short time. However they were 12 ft and 15 ft forward of the wall behind them -...

It may help if you could add a sketch to show the floorplan and where you intend to place your speakers - and which speakers you are considering. I had ML 13As in a large and difficult room where the MLs were most unhappy so they have now been sold. Not due to the size of the room, but their...

Like many paint materials it needs to be used with care but it's used for my Avantgarde speakers too. If applying at home, I'm sure the instructions will say use in a well ventilated space (ideally outdoors) and wear a face mask and probably goggles. Once dried, it's as safe as any finish.

I don't have experience with the amps you mention with my 13As, but I did buy a Sanders Magtech specifically for the MLs. I also had a Gamut D200 Mk III. Both seemed to be good matches with the 13As but I decided to sell the Sanders (no good with Avantgardes) and the 13As (no good in my...

I too considered the Revel Studio 2s when I decided to upgrade from 2002 Avantgarde Unos. I didn't mainly because I thought they were possibly rather long in the tooth and I should be looking at newer designs. Also, having successfully tried Quad 2905s (with 2912 mods), I thought that...

I think your wife has probably made the right decision! How did the Summits perform in your room? I suspect you may have wanted a bit more oomph. I bought 13As but probably should have gone for the 15As, although the additional cost is excessive. The 15A stands upright compared with the laid...

Yes, probably up to about 6 ft is fine. My speakers are 12 ft and 15 ft in front of a curved floor-to-ceiling glazed wall. Far from good for electrostatics but fine for horns! Peter

My room is 945 sq ft with 7'7 ceilings so a little over 7000 cu ft. I bought 13As speakers but probably should have gone for 15A. I was advised by others on this forum that 13As would be good. Unfortunately the MLs disappointed but not because of their size. They were placed mid-room and...

Yes, it seems the Gaia III is good for Montis. Montis weighs 26.3 kg and a set of 4 Gaia IIIs is good for 32 kg. Lucky you - my speakers require Gaia Is at about 4 times the price! I doubt the Montis needs the extra long threads as the standard feet make contact with the thread in the base...

Don't use Gaia IIIs if you should be using Gaia IIs. Their recommended maximum load should not be exceeded as performance drops off quite quickly if overloaded. The 11A, 13A, 15A range that have amps built into their bases require a special long thread for Gaias, but IsoAcoustic now know...

Well that's interesting. My own experience with MLs (13As) is that they really do need a rear wall (the one behind the speakers) for them to sound good. Maybe some wall treatment is needed but no wall (or a very distant wall) results in poor sound. I found this out in my own room where the...

You may be surprised. All the women in my life really love the Avantgardes and wanted me to sell the MLs before I had a real chance to test them. Since that photo was taken (of the earlier Unos), I've changed to Duos and modified their appearance to make them seem more "friendly" by ditching...

Hi Neil I was very interested to read your post. Like you, I enjoy female vocals and like you I was considering a change in speakers last year. My experience was from a rather different starting point, but it may be helpful in your search. Since about 2002 I've had Avantgarde Uno horn...

You'd have to be about 6 ft from the 13A or 11A for them to be correctly tilted. The 15A is vertical - the 11a and 13A should be near vertical unless you want nearfield monitoring - in which case you don't want Martin Logans! If they were built vertical and you wanted to sit very close (or on...

It's odd that Martin Logan still builds most of their speaker with so much backwards tilt. The present top range includes the 11A, 13A and 15A, but only the 15A has a vertical panel. Granted it's taller than the others, but I have 13As and there's no doubt they sound appreciably better when...

I hope someone can help me find the calibration table for the PBK microphone supplied with my ML speakers. The trouble is, I want to use it with Dirac Live rather than with Anthem. Why? Because my amplifier has Dirac built in and needs a calibration table. Is there a website where I can enter...

You certainly don't want your speakers too far from the rear wall. I had my 13As mid-room with 12 ft behind one and 15 ft behind the other in my large semi-circular room. No good at all for ELS speakers! These project half their sound energy backwards and they need the rear wall to salvage...

Thanks Robin and Sfinge. The photo I posted was taken soon after my MLs arrived and when I was comparing one set of speakers with the other. Unfortunately in my room, the old Unos won out, so I'm selling the Martin Logans. I blame the room, not the MLs. They need a wall behind them...

Since this thread started in 2017, I'm sure the OP has bought his SACD player by now, but others may be interested in another option that I don't think has yet been suggested. Mark Levinson's new 5101 SACD / CD player / Streamer / DAC. A sort of modern day ML 390S (but sadly without the...