Search results

Mind you the current fo 20khz is also low. That's why this is not usually a big issue. I had a maranz avr I used when my Arcam 300 was in the shop. This had the issues with loud music/films. I still think many AVR s are OK for esl. I'll agree to that many 9 to 13 Ch AVRs may fail, but the...

I have used Arcam receivers for 14y the last 10 class g types without any issues. It is more than enough loud both for films and music in a fairly large room.

After I got Dirac it sounds good all over but excels at the sofa both sides.

Like for electric current a cable is limited to carry a certain current. That is essentially the difference in the hdmi standards. Certified only guarantee you have the bandwidth. If not you may experience snow on the picture (these are the lost 0 and 1 in the transmission), which can also...

Because men seem to need the unneeded an most oversized whilst women will go to the edge of what they can really benefit from and also enjoy the house. In our case my wife will say yes as long she sees/hears it is genuinely better and we can still enjoy the house (goes for me too). Ok I'm the...

I also heard the Neolit some years back at a Hi-Fi fair. Although good, not that good, but maybe this due to the the rest of the gear or the rooms with too many people. In any case even if I had that kind of money to through after a set of speakers I would not allow them in my home - and wife...

I guess that was my point 👌

So why not do that permanently if earnings go up? We'll there is the brand image and selling at low cost will make it say more common as a product even given the impression it may not be a top product. So a clearance sale once in a while to meet the forecast indeed.

I think it depends on your environment. If you have lots of dust or other (e.g. smoke) often, if not less often. I go about 6 months.

Standard vacuum cleaner with a small brush works for me. ML recommends that and the actual film is quite strong.

You can easily check. Unplug the power to the LS wait 5 min or so. Play something, listen, and plug in the power again. That will at least give you an idea if the panels are working at all.

Not bad. If I recall correctly they sold for 4k as new. So still worth it seems.

I hah an issue with the one panel after a couple of years. Untill that I found the sound was as when I got them. ML actually changed the panels in both LS (free of charge to me). My surprise was how much better they sounded when I got them back. So I think the change comes sneaking so you simply...

Happened to mine as well and they went to the shop as under warranty. Two new panels free of charge, even the working panel switched to ensure the very same sound from both ls

I had maranz and can't complain. But I just was not entirely happy. So I ended with Arcam (class g) indecently the same as JBL and Lexicon receivers. We'll your ears are to decide. And the new line up of Arcam (surely goes for the class g JBL and Lexicon) does suffer from firmware bugs.

Clear enough. I was aiming at the amp's capabilitity, in particular only 8 ohms amps, over an extended period of time at loud volumes. I can in principle go 275w and same experience as you - sound is stil crisp and clear, although not something I'd like to sit in for a long time.

That not any combi works is a known fact and I'll buy that for stats it's even more so. However, it seems ml has tested their speakers with a range of amps and found most suitable, even 8ohm amps (although there is remark about long time at high volume can cause issues). I had a 8 ohm only...

Only the Summits are hard to get new. I am Ali's looking what to get next once I need to replace mine (lower end). The new design is a no go for us so I'm a bit in the dark. So maybe ending with the ELS X or the classic. I use it fo cinema as well, so I already have the dynamo 1100 to that end.

Looking forward to sharing our experiences with ML and other stuff:music: