Jazzman53's latest activity

If the diaphragm coating is still good (still electrically conductive) but its electrical charge is being drained away (faster than the...

Not to worry... even with the added D/A & A/D conversions, once you've experienced active bi-amping, you will NEVER go back to a passive...

Since the ReQuest and Monolith III were made in roughly the same timeframe, they likely used the same 12" driver in both. I can assure...

It's been my experience that panel size and transformers are the significant variables affecting an ESL's sound, and [transformers being...

Never mind... I just saw your other posts about your Clarity speakers outputting no sound.

Hi wfissel, What problems are you having with your Clarity speakers?

The heat-shrink method isn't the best choice for curved panels because it tensions the diaphragm equally in all directions, whereas a...

I can tell you how my MkIII speakers diaphragms are tensioned but it would not be applicable to an ML panel, because my panel...

Welcome to the ML Forum, Probe! I guess you're discovering how addictive ESLs can be :-) BTW; I have a Carver C1 and three Carver...

Good stuff John, Most Acoustats were full range ESLs, which need about twice the diaphragm-to-stator gap (d/s) to accommodate the...

I believe that ML added the music sensing circuit to mitigate the panel fading problem by de-energizing the HV bias supply when no music...

Assuming the problem is within the panels (not up-stream); Panels lose volume when their diaphragms can no longer hold a full charge...

The diagnostics JonFo referenced above should nail down the problem but I will venture a guess that's consistent with the symptoms. I...

Welcome to the forum Fulham Tarheel, Nice score on the ESL9's, and no need to apologize for Class D. I remember the early class D...